Process Water Filters "PWL" Series

2" to 2 1/2" FPT





Process Water Filters
Integrated Liquid Separator / Vacuum Filter
Back to Liquid Filtration
Home


Process Water Filters "PWL" Series


Applications & Equipment

  • Primarily used in chiller systems where rust platelets & particulate must be removed from process water to prolong the life of the water chiller
  • Separation of metal chips from machining fluid cooling systems
  • Plastic injection molding machines uses the PWL to avoid using solvents to clean their chillers for environmental protection.
Image of Solberg's PWL series water filter

Features & Specifications

internal diagram of Process water filter
  • 5 micron polyester media
  • Quick release stainless steel V-band clamp
  • Seamless drawn housing hemispheres - not welds to rust
  • Quick release stainless steel V-band clamp
  • 1/4" drain port and vent port standard
  • Maximum flow rate is based on aqueous flow at 1.0 PSID
  • 80 PSIG maximum working water pressure
  • 120F (49C) maximum operating temperature
  • Filter elements should be changed out at 1-2 PSID above initial pressure drop reading
  • Durable carbon steel construction with baked enamel blue finish.


Benefits Options

  • Minimizes the need for periodical solvent flushes of the heat exchanger in water chiller systems
  • Small footprint
  • Pleated replaceable filter element cartridge offers high throughputs, long service life, and fine particle retention.
  • Optional easy-to-read gauges eliminates costly disassembling of filter for maintenance and machinery downtime
  • Extremely lightweight design and easy maintenance
  • Environmentally friendly
  • Stainless Steel assemblies
  • Epoxy coated housings
  • 1/4" taps on inlet and outlet
  • Pressure gauges
  • Contact factory for larger sizes
  • Support Legs


Model No.
GPM
FPT Inlet & Outlet
Dimensions - Inches
Approx. Wt. lbs
A
B
C
D
E
F

A
PWL-85A/1-200C
50
2"
12 3/8
1 7/8
8 3/4
5 7/8
1 7/8
7 5/8
13
B
PWL-86A/1-200C
120
2"
18
1 7/8
8 3/4
5 7/8
1 7/8
7 5/8
18
A
PWL-85A/1-250C
50
2-1/2"
1303/8
2 7/8
8 3/4
6 7/8
2 7/8
7 5/8
13
B
PWL-86A/1-250C
120
2-1/2"
19
2 7/8
8 3/4
6 7/8
2 7/8
7 5/8
18
Replacement Filter Elements

Model No.
GPM
Surface Area ft2
Dimensions - inches
O.D.
I.D.
HT

85A/1
50
4.5
5 7/8
3 1/2
14
86A/1
120
5.9
5 7/8
3 1/2
14



Request Information Home Contact Us


Visit our other sites: jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Drive | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com


Privacy Policy