Filter Selection
Pressure Drop Versus Flow Rate (SCFM)
The table below gives suggested flow rates for certain pipe sizes at tested pressures. This is only a guide to assist in selection the proper filter size.
|
Filter Model |
Specialty |
T-Line |
In-Line |
|||||||
| F-GGC | F-40C | FT-40C | FT-40C | FT-60C | F-65 | F-125 | F-300 | F-600 | F-1200 | |
| Capacity (SCFM) at 100 psig Inlet Pressure | 5 | 15 | 20 | 40 | 60 | 20 | 60 | 100 | 200 | 1200 |
| Pressure Drop at 100% Capacity (psi) | 0.5 | 1.5 | 1.5 | 2.8 | 4.4 | 3.1 | 4.8 | 5.9 | 7.1 | 10 |
| Pressure Drop at 50% Capacity (psi) | 0.25 | 0.75 | 0.75 | 1.4 | 2.4 | 1.6 | 1.9 | 2.0 | 3.6 | 4.5 |