Specialty Filters

• C Models- Ployclear II Rigid Polyurethane Thermo Plastic Unique to Beach
• Clearview
• Good strength and operating temperatures up to 180 Fahrenheit.
• Excellent resistance to synthetic oils, hydrocarbons, solvents, caustics and acids.
• Superior sunlight resistance
• (UV)Maximum Pressure - 250 psi

Cylform Desiccant Elements by Beach

Variety of Desiccant Fills

Since no one desiccant can solve all problems, we offer a variety of Beach patented and trademarked elements for our compressed air and gas filters.

General Filtration - The standard desiccant will solve most filtration problems. It is a stabilized crystal that provides excellent filtration of hydrocarbons and moisture. It has the uncanny ability to absorb oil while it adsorbs moisture. At full flow rate it traps all contaminates - oil vapors, water and hydrocarbons.; The filter disc in the top of the element removes particulate as small as 0.3 microns.

Moisture Removal and Minus Dew Point

In multiple element filters such as the F - T60 and all In-Line Models the silica gel element should be placed at the top with a standard Cylform element at the bottom.Incorporated wit a refrigerated dryer, the silica gel element can result in lowering the dew point form 0 C to -40 C.

Odor and Oil Vapor Removal - If odor caused by oil vapor or other contaminants needs to be removed, an activated carbon fill is recommended as a secondary desiccant. This can be accomplished by using filters in tandem or by incorporating two different elements in such filters as the Beach In-lines or the F-T60C.

Special Desiccants - Other special fills are available on request. Also, a combination of elements with different fills can be used for special applications

.All filters are sealed with plastic caps and replacement elements are packaged two to a sealed polyethylene bag to preserve the low moisture level.